Slimflex Simple Low Density 3/4 Length Insoles
Slimflex Simple Low Density 3/4 Length Insoles are a cost-effective, fully customisable foot orthotic that can be worn alone to provide general control or adapted by a clinician into a semi-bespoke device. The low density of these insoles means that they are great for cushioning your feet, making them a great solution that are looking for more shock absorption than hard support.
Please note that the design of these insoles has recently been updated. Customers may continue to receive a previous version for a limited period.
Sizing of the Slimflex Simple Low Density 3/4 Length Insoles
Slimflex Simple Low 3/4 Insoles are available in an amazing six different sizes that should suit most adults. To find your best size, simply match your shoe size to the table below.
To ensure a precise level of fit, we recommend removing the existing insole from your shoes and measuring the width at the widest point as shown in the image below. Match this width to the dimensions listed below in order to find the pair that will best fit your shoes.
|UK Shoe Size ||EU Shoe Size ||Dimensions (Length x Width) |
|Size 1 - 2.5 ||Size 33 - 35 ||149 x 70mm |
|Size 3 - 4.5 ||Size 36 - 38 ||155 x 72mm |
|Size 5 - 6.5 ||Size 39 - 40 ||165 x 74mm |
|Size 7 - 8.5 ||Size 41 - 42 ||172 - 77mm |
|Size 9 - 10.5 ||Size 43 - 44 ||180 x 85mm |
|Size 11 - 12.5 ||Size 45 - 48 ||198 x 85mm |
How Thick Are Slimflex 3/4 Low Insoles?
Please view the image and information below to see just how thick Slimflex 3/4 Low Insoles are:
If you're after specific measurements, please see the information below:
- Heel Thickness: 5mm
- Arch Height: 20mm
- Forefoot Thickness: 3mm
Who Can Benefit from the Slimflex Simple Low Density 3/4 Length Insoles?
The low density 3/4 length insoles are fantastic for helping to reduce the pain that commonly comes with range of foot conditions, enabling you to go about your day more easily and freely. They reduce pressure on the plantar fascia area and also help to stabilise feet for a more secure gait though increased arch support.
Which Conditions Can Slimflex Low Density 3/4 Insoles Help With?
Slimflex Simple Low Density Insoles are suitable for the following conditions:
- Metatarsal pain
- Plantar fasciitis
- Jogger's heel
What's more, thanks to the huge level of customisation the Slimflex Simple Insoles offer, the treatment options are almost infinite, making them ideal for use by podiatrists. Slimflex Simple Insoles are recommended when the speed of turnaround is incredibly important and where chairside treatment is the chosen solution to biochemical pathologies.
Features of the Slimflex Simple Low Density 3/4 Length Insoles
To help reduce tension in the plantar fascia area, the Slimflex Simple Insoles feature a first metatarsal cut out, which also provides a raised mechanism to reduce the pressure on the first Metatarsophalangeal Joint (MPJ). This can help reduce the pain associated with Plantar Fasciitis.
Additionally, the metatarsal raise on the insoles supports the metatarsal area and redistributes weight away from the ball of the foot. For increased stability and control, a deep heel cup supports the heel and reduces pressure by redistributing the body’s weight over a greater surface area on the sole of the foot.
A medial flange increases control of the medial aspect of the rearfoot to provide correction, increased stabilisation and gait training by increasing arch support. Additionally, a medial arch support and lateral control improves misalignment of the foot and aids in reducing pronation and improving sagittal plane control.