Sidas 3Feet Low Arch Work Insoles

Flat feet can cause a lot of foot pain throughout your working day, don't suffer unnecessarily with these Sidas 3Feet Low Arch Work Insoles. Built with anatomical low arch support and an anti-static stirp that distributes electrostatic energy safely, these insoles are ideal for promoting correct foot alignment safely, whether manufacturing or engineering.

What's Included?

• 1x Pair of Insoles

Sizing of the Sidas 3Feet Low Arch Work Insoles

These Sidas Work Low Arch Insoles are a unisex insole that comes in six sizes that should be able to fit the majority of adults. To find the size which is right for you, simply match your shoe size with the corresponding insole sizes in the table below:

Who Can Benefit from the Sidas Work Low Arch Insoles?

Industrial work can put heavy strain on your body and there's no reason to make that harder for yourself by working with the incorrect arch support. These low arch insoles are anatomically designed to relieve your feet from flat foot associated issues while cushioning them with a shock absorbent gel heel pad and protecting them thanks to the anti-static forefoot strip.

Electro-Static Dissipation

Designed with an anti-static forefoot strip, these insoles will help reduce the risk of sparks or electrostatic discharge when working in an environment where any electrical charge could result in a severe problem. This anti-static strip safely decreases the friction that naturally builds from the movement between your foot and inner shoe as you walk.

What Certification Do These Insoles Have?

These insoles meet the requirements of the Electrostatic Discharge Control that ensure no charge greater than or equal to 100 volts is released by the wearer. This ESD certification means you can be confident in the technical excellence of the Sidas Work Low Arch Insoles. For optimum protection, these insoles should be used alongside other anti-static clothing. 

Will These Insoles Also Help Against Other Foot Ailments?

Not only do these insoles provide low arch support but they also have layers of cushioning and a shock absorbent gel heel pad that help assist against issues such as:

• Ankle Instability
• Arch Pain and Strain
• Back Pain
• Blisters
• Bunions
• Collapsed Arches
• Corns and Calluses
• Foot Fatigue
• Flat Feet
• General Foot Pain
• Heel Pain
• Medial Knee Pain
• Over-pronation
• Plantar Fasciitis
• Plantar Fibroma
• Shin Splints
• Weak Arches

Low Arch Support

Low arches can cause you serious discomfort alongside other issues that will only get worse throughout the working day. Thanks to the anatomical design of the low 26mm EVA arch shell, these insoles promote correct foot alignment to encourage better posture which in turn distributes pressure and relieves stress on your joints.

Long-Term Joint Protection

Whether engineering or manufacturing, being on your feet for long hours in the industrial workplace will expose your feet to frequent impacts that accumulate over time. To protect your joints, these insoles feature a pressure distributing heel gel pad that absorbs shocks to reduce foot pain and fatigue in the short-term while promoting joint health in the long-term.

Are These Insoles Hygienic?

Hard physical work will naturally result in foot sweat, which can result in other issues such as foot odour. These insoles feature an anti-bacterial topcover made from a microfibre that provides microbial resistance helping to keep feet fresh during long periods of wear in hot working environments.

Key Features of the Sidas 3Feet Work Low Arch Insoles

• Built with a low arch EVA shell 26mm to assist with correct foot alignment and better posture
• Cushioning and anti-bacterial microfibre topcover promotes better hygiene for fresher feet
• Anti-static forefoot strip reduces the risk of electrostatic discharge so that you can work safely
• Gel heel pad is shock absorbent to distribute pressure from key impact zones to protect your joints

What Kind of Arches Do I Have?

The correct arch support will improve your foot comfort, reducing pain in your everyday life. For effective results, it is crucial that you select the arch support that is designed for your arches. You can find out whether you have low, medium or high arches by following the simple steps below.

1. Wet your foot and step onto a surface that will allow you see the print of your foot once you have taken it away.
2. Low arches will be indicated by the print showing your whole foot.
3. Medium arches will be indicated by the print showing a clear outline of your foot, with the ball of your foot and your heel connected by a strip
4. High arches will be indicated by an extremely thin, possibly disjointed line connecting your ball of foot and heel markings.

Which Sidas 3Feet Insoles Should I Choose?

These insoles are available with three levels of arch support. Refer to the "What Kind of Arches Do I Have" section below to determine your arch type, then choose from one of these three arch types:

• Sidas 3Feet Work Low Arch Insoles (This Version)
• Sidas 3Feet Work Medium Arch Insoles
• Sidas 3Feet Work High Arch Insoles

UK Delivery Information & Fees

This product is normally dispatched by Royal Mail. The normal delivery expectation of this service is 1 to 3 working days.

When ordering before 2.00pm (Monday to Friday), your item will usually be dispatched the same working day.

We offer free delivery on all orders of £40.00 and over. On orders below £40.00, a £3.95 delivery charge is applied.

Please see our specific delivery information page for more information. For up to the minute delivery information, please call our customer care team on 020 7501 1102 who will be happy to help.

Our Guide to Finding the Perfect Size and Fit

Using Your Shoe Size

For most of our insoles, the easiest way to find the best size for you is to go off of your current shoe size. The majority of our insoles are available in a range of sizes and you can simply select the size that best fits your existing shoes.

Please be aware that, as with shoes, there can be slight variations in the size of insoles. For example a size 8 of one brand might not be exactly the same size and width as the size 8 of another. To help account for these discrepancies, a number of our insoles include dimensions to help you ensure you're getting the right size.

Measuring Your Current Insoles

While using your shoe size to find your best size is a good guide, it is not always foolproof. If you want to guarantee that your insole fit your shoes as closely as possible, we recommend measuring your existing insole and using this as a guide to your size.

To do this, please follow the steps outlined below:

1. Remove the existing insole from the shoes you wish to use your new insoles with (please note that not all insoles are removable)
2. Measure the insoles at their longest and widest points (see the below diagram for an idea of where this will be
3. Match the measurements to the dimensions of the insoles listed, and choose the size that best fits your results

Where Can I Find the Dimensions?

The dimensions for insoles can be found on the "Product Details" tab (please see below) and are usually found in the sizing section of the listing, in a table. Please be aware that not all products currently have the dimensions listed.

The dimensions of insoles can usually be found on the "Product Details" tab

What If There Are No Dimensions Listed?

If you do not see the dimensions listed on the Product Details tab, please fill in the form below and we will work to get the relevant information as quickly as possible. We will email you once we have the information that you have requested.

Trimming Your Insoles to Fit

To get the ultimate level of fit from your insoles, you can trim them to make a small adjustment. To trim your insoles, simply follow the steps below:

1. Remove your existing insoles from your shoes
2. Line up your existing and new insoles at the heel
3. Trace the outline of the insoles against the new pair at the toe end (see the image below for an example)
4. Carefully cut along the traced line
5. Your insoles should now fit your shoes better

Carefully trace the outline of your insole

Please note that not all insoles are suitable for trimming. Most insoles are unsuitable for return once they have been trimmed to fit; we recommend bearing this in mind prior to trimming.

If you would like a more detailed guide to trimming your insoles, please read our full guide on How to Trim Your Insoles.