SOLE Performance Thin Sustainable Insoles
Made from recycled wine corks, these SOLE Performance Thin Sustainable Insoles are not only eco-friendly but heat and wear mouldable for a customised fit. They have a low-profile design that's suitable for any arch height, and are ideal for tight-fitting footwear such as cycling cleats, ski boots and running shoes.
What Sizes Are Available?
The SOLE Performance Thin Sustainable Insoles are available in 12 unisex sizes, from UK Size 2 to UK Size 13 so most users should be able to find a suitable fit. Please use the shoe size conversion table below to check which size will suit you best, then confirm your selection from the drop-down menu above.
|UK Shoe Size ||EU Shoe Size ||Length |
|UK Size 2 ||EU Size 35.5 ||22cm |
|UK Size 3 ||EU Size 36 ||23cm |
|UK Size 4 ||EU Size 37 ||24cm |
|UK Size 5 ||EU Size 38 ||25cm |
|UK Size 6 ||EU Size 39.5 ||25.5cm |
|UK Size 7 ||EU Size 41 ||26.5cm |
|UK Size 8 ||EU Size 42.5 ||27.5cm |
|UK Size 9 ||EU Size 44 ||28cm |
|UK Size 10 ||EU Size 45 ||29cm |
|UK Size 11 ||EU Size 46 ||30cm |
|UK Size 12 ||EU Size 47.5 ||31cm |
|UK Size 13 ||EU Size 48.5 ||32cm |
Key Features and Benefits
- Podiatrist approved unisex orthotic insoles for slim-fitting footwear
- Sustainable footbed made from industrial scrap and recycled cork
- Reduces plantar fascia strain and great for lightweight foot support
- Open-cell foam technology provides excellent shock absorption
- Heat and wear mouldable for customised fit
- Improves balance and promotes natural foot alignment
- Density mapped to distribute weight and pressure equally
- Sturdy yet flexible support to prevent excessive arch strain
- Metatarsal support pad relieves pain and pressure in the ball of the foot
- Polygiene fresh technology provides active odour control
- Zero drop so that the heel sits at the same height as the ball of the foot
- Latex-free and vegan, suitable for a wide range of users
- Each pair sold donates $1 to Protect Our Winters charity
- Available in 12 sizes to suit most men and women
Why Should I Buy the SOLE Performance Thin Sustainable Insoles?
A favourite choice for ski and snowboard boots, these thin insoles are also great in dress shoes, casual sneakers, rollerblades, flats and other slim fitting shoes. They're density mapped to provide support where it's most needed without any bulky foam.
Which Conditions Are the SOLE Performance Thin Insoles Suitable For?
Recommended by podiatrists and accepted by the American Podiatric Medical Association, the SOLE Performance insoles have an orthopaedic design that can provide pain relief from various conditions such as:
- Achilles tendonitis
- Ankle pain
- Arch pain
- Fallen arches
- Heel pain
- Metatarsal (ball of foot) pain
- Plantar fasciitis
- Knee pain
- Shin splints
What Are Orthotic Insoles?
Orthotic insoles are specially designed with built-in arch support and provide superior shock absorption. Besides relieving symptoms of foot pain, podiatrist-designed orthotic insoles help correct any balance issues and can also improve pains in the knee joints and lower back.
Why Should I Wear Orthotic Insoles?
If you suffer form recurring foot pain and leave them untreated, they can be immobilising over a long period of time. With regular use, orthotic insoles can help to restore your foot function back to normal in a holistic and non-intrusive way acting as a preventative method of combatting foot conditions such as plantar fasciitis, arthritis and Achilles tendonitis.
How Do SOLE Footbed Insoles Help Provide Pain Relief?
SOLE Footbed insoles have been clinically proven to reduce plantar fascia strain by a third and prevent pronation. The signature shape also helps to improve posture, stability and athletic performance while reducing the risk of injury.
How Can the SOLE Performance Insoles Help with Alignment?
The mouldable orthopaedic shape of these sustainable insoles equalise pressure distribution and optimise the natural motion of both your feet and ankles to treat overpronation and supination to keep you in a neutral position. The metatarsal support pad relieves pain and pressure in the ball of the foot by lifting toe bones into natural alignment.
Heat and Wear Mouldable for a Customised Fit
To ensure you get the perfect fit and maximum benefits, every pair of SOLE custom footbeds have a mouldable orthopaedic base layer that can be heated in an oven before fitting them in your footwear. You can also mould them by removing the factory sock liners from your footwear and replacing them with your SOLE Footbed insoles that will adapt to your unique contours after a few days of regular use.
- Heat in the oven for 2 minutes at 90°C (200°F)
- Place the insoles in your shoes
- Step into your shoes and the insoles should mould to your feet
Sustainable Insoles Made with 20% Industrial Scrap EVA and Recycled Cork
Not only are these SOLE Performance insoles designed to provide various health benefits, they are a sustainable choice that's kinder to the environment being made with 20% industrial scrap and natural recycled wine corks. They're also vegan and latex-free, making them suitable for a wider range of users.
Affordable Alternative to Custom-Made Orthotics
Customised orthotics can be extremely expensive and not always necessary for everyone with minor indications of foot discomfort. As these SOLE insoles can be worn with most slim-fitting shoes, they are a brilliant cost-effective option to prevent foot fatigue and other pains.
Anti-Odour Technology For Odour Control
The recycled cork used in the SOLE Performance Insoles are moisture-wicking to prevent sweaty feet and they're made with Polygiene technology for active odour control.
Insoles That Go a Step Further By Helping a Charity
These performance insoles are designed in collaboration with big-mountain skier Chris Davenport, and $1 from every pair purchased goes to Protect Our Winters.
Do You Sell Other SOLE Insoles?
Whether you're after insoles with EVA footbed or recycled cork, you'll find the perfect pair by browsing our SOLE Insoles range.
How Do I Mould and Fit the SOLE Insoles in My Shoes?
Please refer to these instructions on how to mould your new SOLE insoles for a customised fit.
- Cushioning: 0mm
- Total thickness: 1.6mm
- Width - Forefoot (approx.)
- Length - Heel to toe (approx.)